The safety and comfort of a baby swimming ring are crucial, making it important to properly inflate the ring. Here’s a guide from Hongyu, the manufacturer of baby swimming rings, on how to correctly inflate a baby swimming ring:
1. How to use the baby swimming ring
①. Take out the Kami Bear baby swimming ring and count the related accessories. The size of the inner ring should be slightly larger than the baby.
②. Check the inflation of the baby swimming ring, whether the air volume is appropriate, whether there is leakage or damage, and whether the buckle connection is good.
③. Carefully check the outer ring and the inner ring respectively. The air volume is 80%, firm and soft, to ensure that the baby swimming ring does not leak. Most of the outer rings of baby swimming rings on the market are designed with double air bags. When inflating, please inflate the upper air bag first, and then the lower air bag.
④. Open the buckle of the baby swimming ring, fold the buckle back on both sides with both hands, and open the left and right sides of the swimming ring in opposite directions appropriately, and put it on the baby's neck (the upper layer is marked with a warning).
Check that the neck circumference and the inner diameter of the baby swimming ring are properly tight, so that the baby's lower jaw is placed in the lower jaw groove of the swimming ring, and then fasten the buckle. When putting on the ring, two people can operate together, one person holds the back of the baby's head, and the other person wears the ring, and the action should be gentle.
⑤. If the air volume is insufficient and has not been used for a long time, you can use the attached air pump to inflate it. When inflating, first pull out the air nozzle, pinch it with your hand, and then inflate the ring. Let go after it is full;
If the air volume is too much, you can pinch the root of the air nozzle to deflate and adjust the air volume, tighten the air nozzle, and press the air nozzle into the baby swimming ring with your fingers; the Kami Bear baby swimming ring should not be over-inflated. The inflation degree is about 80%, and the soft and hard feel is the standard.
⑥. Slowly put the baby with the baby swimming ring into the baby swimming pool, and help the baby grab the handrail at the bottom of the swimming ring. When the baby is swimming, parents cannot grab the swimming ring with their hands to move the baby in the water. It is recommended to hold the baby's hand or hold the baby's little butt to let it move in the water.
⑦. After using the baby pool ring, if you need to deflate it for storage, you can open the air nozzle plug and squeeze the bottom of the air nozzle, and squeeze and deflate the baby swimming ring appropriately.
⑧. When using the baby pool ring again, use an air pump to inflate it. First, inflate the upper safety air nozzle. It is not advisable to inflate it too much before inflate the bottom safety air nozzle. Inflate it according to the appropriate soft and hard feel, and then cover the air nozzle cover.
2. Precautions for using the baby swimming ring in winter
①. When inflating the baby swimming ring, do not inflate it too much, because the indoor temperature is limited now. If it is inflated too much, it will be full of cold air. Once it is placed in hot water, the baby swimming ring will burst at the interface due to the principle of thermal expansion and contraction due to over-inflation.
②. Before using the baby swimming ring in winter, soak it in 30-40 degrees water for a while, and wait until the material of the baby swimming ring softens and the air inside adapts to the water temperature before using it.